Motorcycle Chain Manufacturers Share 4 Ways To Lubricate

Motorcycle Chain manufacturers share the lubrication of conveyor chains and chain drives. There are usually four lubrication methods:

1. Manually use oil pot or oil brush to supply oil regularly;

2. Oil drip lubrication, use the oil cup to drop oil to the gap between the inner and outer chain plates of the loose edge through the oil pipe;

3. Oil bath lubrication or splash lubrication, using a sealed transmission box, the former chain and a part of the sprocket are immersed in oil, the latter uses a larger diameter oil splash plate to splash oil

4. The oil pump is pressure-sprayed and lubricated. The oil pump continuously supplies oil to the chain through the oil pipe. The circulation oil of the marketing consultant can play the role of lubrication and cooling.

The kinematic viscosity of the lubricating oil used in the chain drive is about 20-40mm2 / s at the operating temperature. Grease can only be used in places where the rotation speed is slow and oil cannot be supplied.


The above content is organized and shared by the Silent Chain manufacturer, hoping to help those in need.