Motorcycle Chain Manufacturers Share The Usefulness Of Guardrail Chains

The use of guardrail chains is wide and wide. For buyers, it is really easy to buy and not easy to maintain. Today Motorcycle Chain manufacturers will solve how to maintain and maintain guardrail chains. Divided into the following 6 items.
1. There should be no skew and swing when the sprocket is installed on the shaft.
2. The tightness of the guardrail chain should be appropriate. The tightness of the chain is: lifted or pressed from the middle of the chain, the center distance between the two sprockets is about 2%-3%.
3. The new guardrail chain is too long or elongated after use, it is difficult to adjust, the chain link can be removed according to the situation, but it must be an even number.
4. After the sprocket is seriously worn, a new sprocket and a new chain should be replaced at the same time to ensure good meshing.
5. The old guardrail chain cannot be mixed with some new chains, otherwise it will easily cause impact in the transmission and break the chain.
6. Remember to add lubricating oil to the guardrail chain in time.

The above content is shared and organized by Silent Chain manufacturers, hoping to help those in need.