Knowledge Of Conveyor Chain
2020年8月24日The tightness of the Conveyor Chain should be appropriate. Too tight increases power consumption and bearings are easy to wear; too loose chain is easy to jump and fall off. The tightness of the chain is: lifted or pressed down from the middle of the chain, the center distance between the two sprockets is about 2%-3%.
After the sprocket is severely worn, the new sprocket and the new chain should be replaced at the same time to ensure good meshing. It is not possible to just replace a new chain or a new sprocket alone. Otherwise it will cause poor meshing and accelerate the wear of the new chain or new sprocket. When the tooth surface of the sprocket is worn to a certain degree, it should be turned over and used in time (referring to the sprocket used with adjustable surface). To extend the use time.
Remember to fill the lubricating oil in time when the lifting chain is working. The lubricating oil must enter the matching gap between the roller and the inner sleeve to improve working conditions and reduce wear.
The above content is organized and shared by the Industrial Sprocket manufacturer , hoping to help those in need.
After the sprocket is severely worn, the new sprocket and the new chain should be replaced at the same time to ensure good meshing. It is not possible to just replace a new chain or a new sprocket alone. Otherwise it will cause poor meshing and accelerate the wear of the new chain or new sprocket. When the tooth surface of the sprocket is worn to a certain degree, it should be turned over and used in time (referring to the sprocket used with adjustable surface). To extend the use time.
Remember to fill the lubricating oil in time when the lifting chain is working. The lubricating oil must enter the matching gap between the roller and the inner sleeve to improve working conditions and reduce wear.
The above content is organized and shared by the Industrial Sprocket manufacturer , hoping to help those in need.
コメント