Agricultural Chain Manufacturers introduces the lubrication methods of transmission chains. There are usually four lubrication methods:
① Manually apply oil regularly with an oil can or brush;
②Drip oil lubrication, use the oil cup to drip oil to the gap between the inner and outer chain plates of the loose edge through the oil pipe;
③Oil bath lubrication or splash lubrication, using a sealed transmission box, the former part of the chain and sprocket is immersed in oil, the latter uses a larger diameter oil slinger to splash the oil;
④The oil pump is lubricated by pressure injection, and the oil pump is used to continuously supply oil to the chain through the oil pipe. The circulating oil can play the role of lubrication and cooling.
The kinematic viscosity of lubricating oil used in the transmission chain is about 20-40mm2/s at operating temperature. Only where the speed is very slow and the oil cannot be supplied, grease can be used instead.
The above content is organized and shared by Transmission Chain Manufacturers, hoping to help those in need.
① Manually apply oil regularly with an oil can or brush;
②Drip oil lubrication, use the oil cup to drip oil to the gap between the inner and outer chain plates of the loose edge through the oil pipe;
③Oil bath lubrication or splash lubrication, using a sealed transmission box, the former part of the chain and sprocket is immersed in oil, the latter uses a larger diameter oil slinger to splash the oil;
④The oil pump is lubricated by pressure injection, and the oil pump is used to continuously supply oil to the chain through the oil pipe. The circulating oil can play the role of lubrication and cooling.
The kinematic viscosity of lubricating oil used in the transmission chain is about 20-40mm2/s at operating temperature. Only where the speed is very slow and the oil cannot be supplied, grease can be used instead.
The above content is organized and shared by Transmission Chain Manufacturers, hoping to help those in need.
コメント