If the conveyor chain is not maintained for a long time, it will cause problems such as increased failure rate and shortened service life. The daily maintenance of the conveyor chain is generally divided into primary maintenance and secondary maintenance. Here Transmission Chain Manufacturers will give you a specific introduction.
1. During the normal use of the conveyor chain, due to normal or accidental wear and various abnormal phenomena during the operation of the conveyor chain, it must be stopped immediately and reported for repair in time to avoid major accidents. Non-professional maintenance personnel or without the permission of professional maintenance personnel can not repair by themselves.
2. When repairing the circuit, the person in charge of the chain production line can be required to appoint personnel to wait at the electric box to prevent others from opening the conveyor chain, and at the same time, hang up the warning sign. At the same time, the power supply must be turned off to perform maintenance, and no live operation is allowed.
3. When the machine is stored for a long time, the conveyor chain should be removed and cleaned with kerosene or diesel oil, and then coated with oil or butter and stored in a dry place to prevent corrosion.
4. The conveying chain should be filled with lubricant in time during work. Lubricant must enter the matching gap between the roller and the inner sleeve to improve working conditions and reduce wear.
The above content is compiled and shared by Agricultural Chain Manufacturers, hoping to help those in need.
1. During the normal use of the conveyor chain, due to normal or accidental wear and various abnormal phenomena during the operation of the conveyor chain, it must be stopped immediately and reported for repair in time to avoid major accidents. Non-professional maintenance personnel or without the permission of professional maintenance personnel can not repair by themselves.
2. When repairing the circuit, the person in charge of the chain production line can be required to appoint personnel to wait at the electric box to prevent others from opening the conveyor chain, and at the same time, hang up the warning sign. At the same time, the power supply must be turned off to perform maintenance, and no live operation is allowed.
3. When the machine is stored for a long time, the conveyor chain should be removed and cleaned with kerosene or diesel oil, and then coated with oil or butter and stored in a dry place to prevent corrosion.
4. The conveying chain should be filled with lubricant in time during work. Lubricant must enter the matching gap between the roller and the inner sleeve to improve working conditions and reduce wear.
The above content is compiled and shared by Agricultural Chain Manufacturers, hoping to help those in need.
コメント